|
Mark the bottom edge line. In this sample, I have used
a straight line, which will mak a V shaped hip wrap.
Other options include rounding this line or creating
a stylized shape with curves or zigzag lines.
|
|
When you have finished drawing your bottom line,
take the fabric off of your model and lay it out on a table.
|
|
Using a ruler, straighten your dart legs out.
At this point, double check that your legs are the same length.
If your legs are not quite the same length, simply make a little
adjustment at the top edge.
|
|
Connect the dots you have used to make your edge line.
Use a ruler if you are making a straight edge.
|
|
To make this pattern easy to stitch together,
I remove the point and draw a 2" line from the top edge
to the bottom edge. This is a much easier angle to
sew when attaching the ties.
|
|
Using a standard tracing wheel and dressmakers tracing paper,
transfer your lines from the side you have draped and marked
to the opposite side of the fabric. In the illustration above,
I have folded the drape along the center and am marking
one of the dart legs.
|
|
Add seam allowances to your completed pattern.
Commercial patterns use 3/4" I prefer the less bulky
1/2" seam allowance that's used in the fashion industry.
|
|
The ties are simple rectangles. I made this tie 2" by
20."
My rule of thumb - You need 12" minimum to make the 'tie.'
The added length is to get a nice drop.
Alternatives to a simple rectangle are to give one end an angle
chevron edge, or a pointed end.
Reversible Hip Wrap Drape
|
